南大巴山前陆冲断褶皱带断裂流体地球化学特征及构造保存研究     

周业鑫  丁俊  余谦  王剑  熊国庆  门玉澎  熊小辉  邓奇 《地质学报》2017,91(6):1169-1180

南大巴山前陆构造带位于城口断裂与铁溪-巫溪断裂之间,为研究该构造带断裂对烃类运移及构造对页岩气保存的影响,本文对该构造带内断裂流体的碳氧同位素和流体包裹体进行了测试分析。测试结果显示,研究区断裂流体碳氧同位素整体较围岩更为分散,δ~(13)C_(PDB)介于-2.9‰~3.9‰之间,属正常海相碳酸盐层的碳同位素值,坪坝断裂附近δ~(13)C_(PDB)呈明显亏损,具外来流体混合的特征。流体包裹体为含烃的气液二相盐水包裹体,气相成分为CH_4,液相为H_2O。包裹体均一温度以城口断裂附近最高,主要为311~336℃,频率峰值温度为328℃;往南叠瓦带流体均一温度主要位于183~269℃之间,峰值为230℃,断褶带峰值为213℃,滑脱褶皱带为170℃,整体表现为向盆内方向降低。盐度主要为4.43%~8.6%NaCl。研究表明,城口断裂作为大巴山构造带南北分界的主干断裂,古流体的形成温度和热演化程度最高,且从盆地向北至城口断裂,各构造带流体的热演化程度、成岩温度、古流体压力均逐渐升高,说明随着构造活动的增强,构造带中的流体更为活跃,持续时间更长,导致流体形成的深度和温度变化较大。构造带内的流体总体上形成于封闭体系,在主构造应力的驱动下,盆地深部含烃流体沿断裂向浅部运移,并与浅部地层流体发生混合,运移通道整体处于封闭状态;而构造带内的一些次级断裂,因其形成的时间以及向下延伸的深度不足以触及下古生界烃源岩层,因此其对流体封闭性的影响有限。  相似文献   

塔西南甫沙地区被动顶板双重构造和乌泊尔地区背驮盆地的数值模拟     

黄光明  李忠海  周永智 《地质学报》2017,91(8):1674-1693

塔里木盆地西南缘前陆褶皱冲断带发育被动顶板双重构造(甫沙地区)和背驮盆地(乌泊尔地区)两种明显不同的构造类型。为了探讨它们的不同成因,利用有限差分软件FLAC开展了一系列二维数值模拟研究。采用遵循平面应变的黏弹塑性本构模型,设置两个滑脱层和三个能干层。同时考虑基底沉降、同构造剥蚀和沉积,缩短速率为8mm/a,剥蚀速率为每年侵蚀基准面以上高程的3×10-7(相当于每1000m每年剥蚀0.3mm)。在基底水平的情况下,采用均一的沉降速率1.6mm/a并以填平补齐的方式进行沉积时,3.5 Ma后发育成与甫沙地区相似的被动顶板双重构造。而当模型采用中部小两端大的拱形沉降速度以及填平补齐的沉积时最终发育成背驮盆地,和乌泊尔地区地质原型接近。模拟结果表明,同构造沉积地层对褶皱冲断带的影响巨大,当沉积物大量堆积在褶皱冲断带前缘时有利于被动顶板双重构造的形成,而沉积物大量堆积在逆冲楔顶与斜坡时则更有利于背驮盆地的发生。模拟结果认为甫沙地区和乌泊尔地区都接受了填平补齐的沉积方式,但基底沉降差异造成了两者的构造样式明显不同。在小范围内(后陆至前陆小于80km),甫沙地区基底以水平方式发生沉降,褶皱冲断带前缘接受了大量沉积;而乌泊尔地区基底在挤压下发生弯曲,使得后陆发生了更大的沉降从而接受了更多的沉积。  相似文献   

Reconstructing the Cryogenian–Ediacaran evolution of the Porongos fold and thrust belt,Southern Brasiliano Orogen,based on Zircon U–Pb–Hf–O isotopes     

J. Pertille  L. A. Hartmann  J. O. S. Santos  N. J. McNaughton  R. Armstrong 《International Geology Review》2017,59(12):1532-1560

The Neoproterozoic geotectonic triad of the Brasiliano Orogen is reconstructed in southern Brazil from studies focused on the Porongos fold and thrust belt. We integrate field geology with isotopic studies of zircon U–Pb SHRIMP and Lu–Hf–O laser determinations in seven metasedimentary and three metavolcanic rock samples. The results indicate that the Porongos palaeo-basin was derived from mixed sources (3200–550 Ma), with major contributions from Rhyacian (2170 Ma) and Ediacaran (608 Ma) sources. Minor contributions from Archaean to Tonian sources are also registered. The maximum depositional age of the Porongos palaeo-basin is established by the age range of 650–550 Ma with T_DM model ages between 2.5 and 1.3 Ga. The reworked signature (ε_Hf values = ?34 to ?4) and the characteristic crustal magma reservoirs (δ¹⁸O ≥5.3 ‰) indicate that these sediments are equivalent to Neoproterozoic granites of the Dom Feliciano Belt. The episodic depositional history started in the Cryogenian (650 Ma) and lasted until the Ediacaran (most likely 570 Ma). A magmatic event of Tonian age is recorded in rhyodacite samples interleaved with the metasedimentary rocks and dated at 773, 801, and 809 Ma. The crustal evolution of the Sul-Riograndense Shield included mountain building, folding and thrusting and flexural subsidence in the foreland. An orogenic triad is revealed as the Pelotas Batholith, the Porongos fold and thrust belt and the Camaquã Basin, all part of the Dom Feliciano Belt.  相似文献   

Reconstructions of the Mesozoide structures in the eastern Amur-Okhotsk fold system, Far East     

V. Yu. Zabrodin 《Russian Journal of Pacific Geology》2009,3(3):260-268

The late Jurassic reconstruction for the Ul’ban synclinorium was proposed based on the lithological and structural similarity of the Upper Permian and Mesozoic complexes of the Yankan-Dzhagdy and Ul’ban lithotectonic zones of the Amur-Okhotsk fold system. It was suggested that the Un’ya-Bom subzone of the Yankan-Dzhagdy LTZ is a fragment of the Ul’ban synclinorium (including its eastern centroclinal closure) that was detached and westward displaced (for 400–600 km) in the first half of the Cretaceous.  相似文献   

华南早中生代从印支期碰撞构造体系向燕山期俯冲构造体系转换的形变记录   总被引：54，自引：1，他引：53       下载免费PDF全文

张岳桥  徐先兵  贾东  舒良树 《地学前缘》2009,16(1):234

华南地区中生代动力体制经历了从特提斯构造域向滨太平洋构造域的转换,但对这种动力体制转换发生的时间和产生的地质效应则存在不同的认识。通过分析华南印支—早燕山构造层(D—J1-2)广泛发育的褶皱构造,识别了早中生代两个世代褶皱构造的横跨叠加型式,发现早期近东西向褶皱构造具有南北成带、晚期NNE向褶皱构造具有东西分区的区域展布特征。基于地层接触关系和早中生代岩浆岩和火山岩同位素年代学数据统计分析,认为这两组叠加褶皱构造清楚地记录了华南早中生代两期挤压事件,近东西向褶皱是对印支早期华南地块南北边缘碰撞造山事件的远程响应,NNE向褶皱则起源于燕山早期((170±5)Ma)古太平洋板块向华南大陆之下低角度俯冲作用,两者发生转换的时代在中晚侏罗世之交。伴随这两期构造挤压而产生的地壳增厚分别诱发了华夏地块三叠纪和晚侏罗世地壳深熔作用和岩浆侵入活动。华南两组叠加褶皱构造的识别为进一步探讨早中生代从碰撞动力构造体系向俯冲动力构造体系转换提供了关键的构造地质学依据。  相似文献   

塔西南阿其克背斜地质构造特征及与油气关系     

杨扬  胡建中  林畅松 《地球学报》2009,30(2):263-270

阿其克背斜是塔里木盆地西南坳陷南缘的一个横向转换构造, 该构造的特殊性在于其枢纽走向与造山带总体是垂直的, 而非平行。笔者通过分析阿其克背斜南、中、北3段地质剖面及各剖面中核部与两翼地层的极射赤平投影, 揭示了阿其克背斜的几何学、运动学、动力学特征。结合地震解释剖面、区域构造背景及前人研究成果, 建立了阿其克背斜形成过程的地质模型, 认为它是在断层传播褶皱和断层转折褶皱共同作用下, 以断层传播作用为主分3个阶段形成的断坡背斜构造, 垂向上自下而上分原地系统、准原地系统和外来系统中的推覆体3个构造层次。塔里木盆地的菱形边界性质造成阿其克地区EW向的挤压应力场。由于背斜上部外来系统中的推覆体南部翘起遭受剥蚀, 东侧被阿其克断层破坏, 因此对油气圈闭不利, 但在北部异地推覆体之下, 原地系统中过熟烃源岩及毗邻凹陷内的烃源岩可以通过断层、不整合面向上部准原地系统中的宽缓背斜圈闭供给油气。  相似文献   

Structural Evolution of the Eastern Qiulitagh Fold and Thrust Belt,Northern Tarim Basin,China   总被引：4，自引：3，他引：1  

YANG Minghui  JIN Zhijun  LU Xiuxiang  SUN Dongsheng  TANG Xuan  PENG Gengxin  LEI Ganglin 《《地质学报》英文版》2009,83(2):347-358

The eastern Qiulitagh fold and thrust belt (EQFTB) is part of the active Kuqa fold and thrust belts of the northern Tarim Basin. Seismic reflection profiles have been integrated with surface geologic and drill data to examine the deformation and structure style of the EQFTB, particularly the deformational history of the Dina 2 gas field. Seismic interpretations suggest that Dongqiu 8 is overall a duplex structure developed beneath a passive roof thrust, which generated from a tipline in the Miocene Jidike Formation, and the sole thrust was initiated from the same Jidike Formation evaporite zone that extends westward beneath the Kuqatawu anticline. Dongqiu 5 is a pop-up structure at the western part of the EQFTB, also developed beneath the Jidike Formation evaporite. Very gentle basement dip and steep dipping topographic slope in the EQFTB suggest that the Jidike Formation salt provides effective decoupling. The strong deformation in the EQFTB appears to have developed further south, in an area where evaporite may be lacking. Since the Pliocene, the EQFTB has moved farther south over the evaporite and reached the Yaken area. Restoring a balanced cross-section suggests that the minimum shortening across the EQFTB is more than 7800 m. Assuming that this shortening occurred during the 5.3 Ma timespan, the shortening rate is approximately 1.47 mm/year.  相似文献   

Usage of strain and vorticity analyses to interpret large‐scale fold mechanisms along the Sanandaj–Sirjan HP‐LT metamorphic belt,SW Iran     

Khalil Sarkarinejad  Abdolreza Partabian  Ali Faghih  Timothy M. Kusky 《Geological Journal》2012,47(1):99-110

3D finite strain analyses and kinematic vorticity measurements were carried out on the Loghon Anticline within the HP‐LT Sanandaj–Sirjan metamorphic belt (Neyriz area, SW Iran). Rƒ/φ and Fry methods were used on the strain markers (e.g. deformed fossils) to interpret geometric relationships between the fold axis, strain ellipsoid axes and shear zone boundaries. The results indicate the predominance of prolate strain in the anticline. Quantitative kinematic analyses show that the W_k parameter is 0. 67 ± 0. 06 (i.e. pure‐shear dominated non‐coaxial flow). This study quantitatively supports the establishment of a dextral transpressive system, which is responsible for the development of the large‐scale right‐lateral shear zones that strike sub‐parallel to the major folds. Flexural shear combined with regional dextral‐shear is suggested to be the most common mechanism of folding in this area. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

川东褶皱带构造发育深度层次与变形样式   总被引：2，自引：0，他引：2       下载免费PDF全文

徐汀滢  季建清  涂继耀  刘志成 《地质科学》2012,(3):788-807

地壳上层的结构特征和变形样式在垂直方向上的变化远远大于其在水平维度上的分异。川东褶皱带自晚古生代以来地史演化统一、地层展布稳定,之后新生代盆、山演化分异幅度较大,使得不同深度的地层和基底得以出露,不同地壳深度层次的构造样式得以展示,这为研究应力的垂向分异,提供了很好的条件。本文基于地壳垂直方向上变形几何的不守恒、构造脱耦以及构造层次的概念,通过野外构造现象的详细解析、野外脆性破裂产状统计、断裂之间交切关系以及活动性质观察等综合分析,结合遥感图像研究,对川东褶皱区隔挡式褶皱和隔槽式褶皱形成提出了新的解释模型。以华蓥山与齐岳山为界,川东褶皱带被分为3个呈叠置关系的区域。研究表明华蓥山以西(Ⅰ区)没有发生强烈的构造变形,变形深度最小(<2 km); 华蓥山与齐岳山之间(Ⅱ区)构造样式为在北北东向剪切作用下形成的陡立构造面理,变形深度为2～5 km; 而齐岳山以东(Ⅲ区)的构造样式是发育轴向北东的宽缓褶曲,变形深度为4～6.6 km。研究分析后得出,川东褶皱带在晚古生代以来,没有经历过大幅度的地壳垂向运动和明显的旋转运动,而白垩纪以后,发育了早期北北东向和晚期北东向的两期构造变形。Ⅱ、Ⅲ两区的构造样式发育于同一应力场(北西-南东主应力场),而晚期北东向断裂活动是形成上述3个区域呈现出断块并置的原因。另外,由于后期不同断块抬升和剥露的差异,使3个区域迥异的构造样式呈现在地表。这一认识对研究油气相关的构造圈闭、固体多金属矿产相关的矿床深度问题以及大地构造学等问题都有创新意义。  相似文献   

库车冲断带秋里塔格构造带东段构造样式与构造演化          下载免费PDF全文

赵星  贾承造  李本亮  程海艳 《地质科学》2012,(3):618-628

秋里塔格构造带位于库车褶皱冲断前缘,其东段包括东秋里塔格背斜和库车塔吾背斜。野外调查和地震剖面解释表明:秋里塔格构造带东段盐下发育断层转折褶皱; 盐上东秋里塔格背斜为滑脱箱状背斜,库车塔吾背斜核部为南倾逆冲断层所破坏。演化剖面显示秋里塔格构造带东段在侏罗纪断陷期发育了正断裂,其后为平静期,直到库车晚期后逆冲断层和褶皱快速发育,背斜最终形成。膏盐岩及古构造对构造变形具有重要影响,一方面作为滑脱层,分割了盐下层与盐上层,导致二者形成不同的构造样式; 另一方面塑性流动充填于背斜核部。由于膏盐岩的厚度差异,东秋里塔格背斜盐上发育褶皱,而库车塔吾背斜核部被逆冲断层破坏,膏盐层厚度还影响了膏盐层上下构造高点的相对位置。盐下构造的发育受侏罗纪古构造控制,进而影响了盐上构造的发育。  相似文献